¿QUÉ ES FAIL2BAN?
Fail2ban escanea los archivos de registro y bloquea las IP que muestran signos maliciosos:demasiadas fallas de contraseña, búsqueda de exploits, etc. Generalmente, Fail2Ban se usa para actualizar las reglas del firewall para rechazar las direcciones IP durante un período de tiempo específico, aunque cualquier otra acción arbitraria (por ejemplo, enviar un correo electrónico) también se puede configurar. Fuera de la caja, Fail2Ban viene con filtros para varios servicios (apache, courier, ssh, etc.).
¿CÓMO INSTALARLO?
sudo apt-get install fail2ban
Code language: Bash (bash)
¿CÓMO CONFIGURAR?
1. Agregue IP para ignorar
fail2ban-client set sshd addignoreip 151.237.48.31
Code language: Bash (bash)2. Establezca el tiempo de prohibición como permanente o 3600 si lo desea durante 10 minutos más o menos
fail2ban-client set sshd bantime -1
Code language: Bash (bash)3. Reiniciar
service fail2ban restart
Code language: Bash (bash)¿CÓMO PROHIBIR IP?
fail2ban-client set sshd banip 151.237.48.31
Code language: Bash (bash)¿CÓMO DESBANAR IP?
fail2ban-client set sshd unbanip 151.237.48.31
Code language: Bash (bash)¿CÓMO CONSULTAR LAS LISTAS DE LA CÁRCEL?
fail2ban-client status
Code language: Bash (bash)¿CÓMO LISTA DE IP PROHIBIDAS?
iptables -nL
Code language: Bash (bash)cd /etc/fail2ban
sudo cp jail.conf jail.local
sudo nano jail.local
Code language: Bash (bash)#
# WARNING: heavily refactored in 0.9.0 release. Please review and
# customize settings for your setup.
#
# Changes: in most of the cases you should not modify this
# file, but provide customizations in jail.local file,
# or separate .conf files under jail.d/ directory, e.g.:
#
# HOW TO ACTIVATE JAILS:
#
# YOU SHOULD NOT MODIFY THIS FILE.
#
# It will probably be overwritten or improved in a distribution update.
#
# Provide customizations in a jail.local file or a jail.d/customisation.local.
# For example to change the default bantime for all jails and to enable the
# ssh-iptables jail the following (uncommented) would appear in the .local file.
# See man 5 jail.conf for details.
#
# [DEFAULT]
# bantime = 3600
#
# [sshd]
#enabled = true
#
# See jail.conf(5) man page for more information
# Comments: use '#' for comment lines and ';' (following a space) for inline comments
[INCLUDES]
#before = paths-distro.conf
before = paths-debian.conf
# The DEFAULT allows a global definition of the options. They can be overridden
# in each jail afterwards.
[DEFAULT]
#
# MISCELLANEOUS OPTIONS
#
# "ignoreip" can be an IP address, a CIDR mask or a DNS host. Fail2ban will not
# ban a host which matches an address in this list. Several addresses can be
# defined using space (and/or comma) separator.
ignoreip = 127.0.0.1/8 212.122.165.163
# External command that will take an tagged arguments to ignore, e.g. <ip>,
# and return true if the IP is to be ignored. False otherwise.
#
# ignorecommand = /path/to/command <ip>
ignorecommand =
# "bantime" is the number of seconds that a host is banned.
bantime = -1
# A host is banned if it has generated "maxretry" during the last "findtime"
# seconds.
findtime = 600
# "maxretry" is the number of failures before a host get banned.
maxretry = 1
# "backend" specifies the backend used to get files modification.
# Available options are "pyinotify", "gamin", "polling", "systemd" and "auto".
# This option can be overridden in each jail as well.
#
# pyinotify: requires pyinotify (a file alteration monitor) to be installed.
# If pyinotify is not installed, Fail2ban will use auto.
# gamin: requires Gamin (a file alteration monitor) to be installed.
# If Gamin is not installed, Fail2ban will use auto.
# polling: uses a polling algorithm which does not require external libraries.
# systemd: uses systemd python library to access the systemd journal.
# Specifying "logpath" is not valid for this backend.
# See "journalmatch" in the jails associated filter config
# auto: will try to use the following backends, in order:
# pyinotify, gamin, polling.
#
# Note: if systemd backend is chosen as the default but you enable a jail
# for which logs are present only in its own log files, specify some other
# backend for that jail (e.g. polling) and provide empty value for
# journalmatch. See https://github.com/fail2ban/fail2ban/issues/959#issuecomment-74901200
backend = auto
# "usedns" specifies if jails should trust hostnames in logs,
# warn when DNS lookups are performed, or ignore all hostnames in logs
#
# yes: if a hostname is encountered, a DNS lookup will be performed.
# warn: if a hostname is encountered, a DNS lookup will be performed,
# but it will be logged as a warning.
# no: if a hostname is encountered, will not be used for banning,
# but it will be logged as info.
# raw: use raw value (no hostname), allow use it for no-host filters/actions (example user)
usedns = warn
# "logencoding" specifies the encoding of the log files handled by the jail
# This is used to decode the lines from the log file.
# Typical examples: "ascii", "utf-8"
#
# auto: will use the system locale setting
logencoding = auto
# "enabled" enables the jails.
# By default all jails are disabled, and it should stay this way.
# Enable only relevant to your setup jails in your .local or jail.d/*.conf
#
# true: jail will be enabled and log files will get monitored for changes
# false: jail is not enabled
enabled = false
# "filter" defines the filter to use by the jail.
# By default jails have names matching their filter name
#
filter = %(__name__)s
#
# ACTIONS
#
# Some options used for actions
# Destination email address used solely for the interpolations in
# jail.{conf,local,d/*} configuration files.
destemail = root@localhost
# Sender email address used solely for some actions
sender = root@localhost
# E-mail action. Since 0.8.1 Fail2Ban uses sendmail MTA for the
# mailing. Change mta configuration parameter to mail if you want to
# revert to conventional 'mail'.
mta = sendmail
# Default protocol
protocol = tcp
# Specify chain where jumps would need to be added in iptables-* actions
chain = INPUT
# Ports to be banned
# Usually should be overridden in a particular jail
port = 0:65535
# Format of user-agent https://tools.ietf.org/html/rfc7231#section-5.5.3
fail2ban_agent = Fail2Ban/%(fail2ban_version)s
#
# Action shortcuts. To be used to define action parameter
# Default banning action (e.g. iptables, iptables-new,
# iptables-multiport, shorewall, etc) It is used to define
# action_* variables. Can be overridden globally or per
# section within jail.local file
banaction = iptables-multiport
banaction_allports = iptables-allports
# The simplest action to take: ban only
action_ = %(banaction)s[name=%(__name__)s, bantime="%(bantime)s", port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
# ban & send an e-mail with whois report to the destemail.
action_mw = %(banaction)s[name=%(__name__)s, bantime="%(bantime)s", port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
%(mta)s-whois[name=%(__name__)s, sender="%(sender)s", dest="%(destemail)s", protocol="%(protocol)s", chain="%(chain)s"]
# ban & send an e-mail with whois report and relevant log lines
# to the destemail.
action_mwl = %(banaction)s[name=%(__name__)s, bantime="%(bantime)s", port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
%(mta)s-whois-lines[name=%(__name__)s, sender="%(sender)s", dest="%(destemail)s", logpath=%(logpath)s, chain="%(chain)s"]
# See the IMPORTANT note in action.d/xarf-login-attack for when to use this action
#
# ban & send a xarf e-mail to abuse contact of IP address and include relevant log lines
# to the destemail.
action_xarf = %(banaction)s[name=%(__name__)s, bantime="%(bantime)s", port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
xarf-login-attack[service=%(__name__)s, sender="%(sender)s", logpath=%(logpath)s, port="%(port)s"]
# ban IP on CloudFlare & send an e-mail with whois report and relevant log lines
# to the destemail.
action_cf_mwl = cloudflare[cfuser="%(cfemail)s", cftoken="%(cfapikey)s"]
%(mta)s-whois-lines[name=%(__name__)s, sender="%(sender)s", dest="%(destemail)s", logpath=%(logpath)s, chain="%(chain)s"]
# Report block via blocklist.de fail2ban reporting service API
#
# See the IMPORTANT note in action.d/blocklist_de.conf for when to
# use this action. Create a file jail.d/blocklist_de.local containing
# [Init]
# blocklist_de_apikey = {api key from registration]
#
action_blocklist_de = blocklist_de[email="%(sender)s", service=%(filter)s, apikey="%(blocklist_de_apikey)s", agent="%(fail2ban_agent)s"]
# Report ban via badips.com, and use as blacklist
#
# See BadIPsAction docstring in config/action.d/badips.py for
# documentation for this action.
#
# NOTE: This action relies on banaction being present on start and therefore
# should be last action defined for a jail.
#
action_badips = badips.py[category="%(__name__)s", banaction="%(banaction)s", agent="%(fail2ban_agent)s"]
#
# Report ban via badips.com (uses action.d/badips.conf for reporting only)
#
action_badips_report = badips[category="%(__name__)s", agent="%(fail2ban_agent)s"]
# Choose default action. To change, just override value of 'action' with the
# interpolation to the chosen action shortcut (e.g. action_mw, action_mwl, etc) in jail.local
# globally (section [DEFAULT]) or per specific section
action = %(action_)s
#
# JAILS
#
#
# SSH servers
#
[sshd]
enabled = true
port = 0:65535
logpath = %(sshd_log)s
backend = %(sshd_backend)s
banaction = iptables-multiport
[sshd-ddos]
# This jail corresponds to the standard configuration in Fail2ban.
# The mail-whois action send a notification e-mail with a whois request
# in the body.
enabled = true
port = 0:65535
logpath = %(sshd_log)s
backend = %(sshd_backend)s
[dropbear]
port = ssh
logpath = %(dropbear_log)s
backend = %(dropbear_backend)s
[selinux-ssh]
port = ssh
logpath = %(auditd_log)s
#
# HTTP servers
#
[apache]
enabled = true
port = 0:65535
filter = apache-auth
logpath = /var/log/apache2/*error.log
maxretry = 3
findtime = 600
#ignoreip = 192.168.1.227
[apache-auth]
enabled = true
port = 0:65535
logpath = %(apache_error_log)s
[apache-badbots]
# Ban hosts which agent identifies spammer robots crawling the web
# for email addresses. The mail outputs are buffered.
enabled = true
port = 0:65535
logpath = %(apache_access_log)s
bantime = -1
maxretry = 1
[apache-noscript]
enabled = true
port = http,https
logpath = %(apache_error_log)s
[apache-overflows]
enabled = true
port = 0:65535
logpath = %(apache_error_log)s
maxretry = 2
[apache-nohome]
enabled = true
port = 0:65535
logpath = %(apache_error_log)s
maxretry = 2
[apache-botsearch]
enabled = true
port = 0:65535
logpath = %(apache_error_log)s
maxretry = 2
[apache-fakegooglebot]
enabled = true
port = 0:65535
logpath = %(apache_access_log)s
maxretry = 1
ignorecommand = %(ignorecommands_dir)s/apache-fakegooglebot <ip>
[apache-modsecurity]
enabled = true
port = 0:65535
logpath = %(apache_error_log)s
maxretry = 2
[apache-shellshock]
enabled = true
port = 0:65535
logpath = %(apache_error_log)s
maxretry = 1
[openhab-auth]
filter = openhab
action = iptables-allports[name=NoAuthFailures]
logpath = /opt/openhab/logs/request.log
[nginx-http-auth]
port = http,https
logpath = %(nginx_error_log)s
# To use 'nginx-limit-req' jail you should have `ngx_http_limit_req_module`
# and define `limit_req` and `limit_req_zone` as described in nginx documentation
# http://nginx.org/en/docs/http/ngx_http_limit_req_module.html
# or for example see in 'config/filter.d/nginx-limit-req.conf'
[nginx-limit-req]
port = http,https
logpath = %(nginx_error_log)s
[nginx-botsearch]
port = http,https
logpath = %(nginx_error_log)s
maxretry = 2
# Ban attackers that try to use PHP's URL-fopen() functionality
# through GET/POST variables. - Experimental, with more than a year
# of usage in production environments.
[php-url-fopen]
#enabled = true
port = http,https
logpath = %(nginx_access_log)s
%(apache_access_log)s
[suhosin]
port = http,https
logpath = %(suhosin_log)s
[lighttpd-auth]
# Same as above for Apache's mod_auth
# It catches wrong authentifications
port = http,https
logpath = %(lighttpd_error_log)s
#
# Webmail and groupware servers
#
[roundcube-auth]
port = http,https
logpath = %(roundcube_errors_log)s
[openwebmail]
port = http,https
logpath = /var/log/openwebmail.log
[horde]
port = http,https
logpath = /var/log/horde/horde.log
[groupoffice]
port = http,https
logpath = /home/groupoffice/log/info.log
[sogo-auth]
# Monitor SOGo groupware server
# without proxy this would be:
# port = 20000
port = http,https
logpath = /var/log/sogo/sogo.log
[tine20]
logpath = /var/log/tine20/tine20.log
port = http,https
#
# Web Applications
#
#
[drupal-auth]
port = http,https
logpath = %(syslog_daemon)s
backend = %(syslog_backend)s
[guacamole]
port = http,https
logpath = /var/log/tomcat*/catalina.out
[monit]
#Ban clients brute-forcing the monit gui login
port = 2812
logpath = /var/log/monit
[webmin-auth]
port = 10000
logpath = %(syslog_authpriv)s
backend = %(syslog_backend)s
[froxlor-auth]
port = http,https
logpath = %(syslog_authpriv)s
backend = %(syslog_backend)s
#
# HTTP Proxy servers
#
#
[squid]
port = 80,443,3128,8080
logpath = /var/log/squid/access.log
[3proxy]
port = 3128
logpath = /var/log/3proxy.log
#
# FTP servers
#
[proftpd]
port = ftp,ftp-data,ftps,ftps-data
logpath = %(proftpd_log)s
backend = %(proftpd_backend)s
[pure-ftpd]
port = ftp,ftp-data,ftps,ftps-data
logpath = %(pureftpd_log)s
backend = %(pureftpd_backend)s
[gssftpd]
port = ftp,ftp-data,ftps,ftps-data
logpath = %(syslog_daemon)s
backend = %(syslog_backend)s
[wuftpd]
port = ftp,ftp-data,ftps,ftps-data
logpath = %(wuftpd_log)s
backend = %(wuftpd_backend)s
[vsftpd]
# or overwrite it in jails.local to be
# logpath = %(syslog_authpriv)s
# if you want to rely on PAM failed login attempts
# vsftpd's failregex should match both of those formats
port = ftp,ftp-data,ftps,ftps-data
logpath = %(vsftpd_log)s
#
# Mail servers
#
# ASSP SMTP Proxy Jail
[assp]
port = smtp,465,submission
logpath = /root/path/to/assp/logs/maillog.txt
[courier-smtp]
port = smtp,465,submission
logpath = %(syslog_mail)s
backend = %(syslog_backend)s
[postfix]
port = smtp,465,submission
logpath = %(postfix_log)s
backend = %(postfix_backend)s
[postfix-rbl]
port = smtp,465,submission
logpath = %(postfix_log)s
backend = %(postfix_backend)s
maxretry = 1
[sendmail-auth]
port = submission,465,smtp
logpath = %(syslog_mail)s
backend = %(syslog_backend)s
[sendmail-reject]
port = smtp,465,submission
logpath = %(syslog_mail)s
backend = %(syslog_backend)s
[qmail-rbl]
filter = qmail
port = smtp,465,submission
logpath = /service/qmail/log/main/current
# dovecot defaults to logging to the mail syslog facility
# but can be set by syslog_facility in the dovecot configuration.
[dovecot]
port = pop3,pop3s,imap,imaps,submission,465,sieve
logpath = %(dovecot_log)s
backend = %(dovecot_backend)s
[sieve]
port = smtp,465,submission
logpath = %(dovecot_log)s
backend = %(dovecot_backend)s
[solid-pop3d]
port = pop3,pop3s
logpath = %(solidpop3d_log)s
[exim]
port = smtp,465,submission
logpath = %(exim_main_log)s
[exim-spam]
port = smtp,465,submission
logpath = %(exim_main_log)s
[kerio]
port = imap,smtp,imaps,465
logpath = /opt/kerio/mailserver/store/logs/security.log
#
# Mail servers authenticators: might be used for smtp,ftp,imap servers, so
# all relevant ports get banned
#
[courier-auth]
port = smtp,465,submission,imap3,imaps,pop3,pop3s
logpath = %(syslog_mail)s
backend = %(syslog_backend)s
[postfix-sasl]
port = smtp,465,submission,imap3,imaps,pop3,pop3s
# You might consider monitoring /var/log/mail.warn instead if you are
# running postfix since it would provide the same log lines at the
# "warn" level but overall at the smaller filesize.
logpath = %(postfix_log)s
backend = %(postfix_backend)s
[perdition]
port = imap3,imaps,pop3,pop3s
logpath = %(syslog_mail)s
backend = %(syslog_backend)s
[squirrelmail]
port = smtp,465,submission,imap2,imap3,imaps,pop3,pop3s,http,https,socks
logpath = /var/lib/squirrelmail/prefs/squirrelmail_access_log
[cyrus-imap]
port = imap3,imaps
logpath = %(syslog_mail)s
backend = %(syslog_backend)s
[uwimap-auth]
port = imap3,imaps
logpath = %(syslog_mail)s
backend = %(syslog_backend)s
#
#
# DNS servers
#
# !!! WARNING !!!
# Since UDP is connection-less protocol, spoofing of IP and imitation
# of illegal actions is way too simple. Thus enabling of this filter
# might provide an easy way for implementing a DoS against a chosen
# victim. See
# http://nion.modprobe.de/blog/archives/690-fail2ban-+-dns-fail.html
# Please DO NOT USE this jail unless you know what you are doing.
#
# IMPORTANT: see filter.d/named-refused for instructions to enable logging
# This jail blocks UDP traffic for DNS requests.
# [named-refused-udp]
#
# filter = named-refused
# port = domain,953
# protocol = udp
# logpath = /var/log/named/security.log
# IMPORTANT: see filter.d/named-refused for instructions to enable logging
# This jail blocks TCP traffic for DNS requests.
[named-refused]
port = domain,953
logpath = /var/log/named/security.log
[nsd]
port = 53
action = %(banaction)s[name=%(__name__)s-tcp, port="%(port)s", protocol="tcp", chain="%(chain)s", actname=%(banaction)s-tcp]
%(banaction)s[name=%(__name__)s-udp, port="%(port)s", protocol="udp", chain="%(chain)s", actname=%(banaction)s-udp]
logpath = /var/log/nsd.log
#
# Miscellaneous
#
[asterisk]
port = 5060,5061
action = %(banaction)s[name=%(__name__)s-tcp, port="%(port)s", protocol="tcp", chain="%(chain)s", actname=%(banaction)s-tcp]
%(banaction)s[name=%(__name__)s-udp, port="%(port)s", protocol="udp", chain="%(chain)s", actname=%(banaction)s-udp]
%(mta)s-whois[name=%(__name__)s, dest="%(destemail)s"]
logpath = /var/log/asterisk/messages
maxretry = 10
[freeswitch]
port = 5060,5061
action = %(banaction)s[name=%(__name__)s-tcp, port="%(port)s", protocol="tcp", chain="%(chain)s", actname=%(banaction)s-tcp]
%(banaction)s[name=%(__name__)s-udp, port="%(port)s", protocol="udp", chain="%(chain)s", actname=%(banaction)s-udp]
%(mta)s-whois[name=%(__name__)s, dest="%(destemail)s"]
logpath = /var/log/freeswitch.log
maxretry = 10
# To log wrong MySQL access attempts add to /etc/my.cnf in [mysqld] or
# equivalent section:
# log-warning = 2
#
# for syslog (daemon facility)
# [mysqld_safe]
# syslog
#
# for own logfile
# [mysqld]
# log-error=/var/log/mysqld.log
[mysqld-auth]
#enabled = true
port = 3306
logpath = %(mysql_log)s
backend = %(mysql_backend)s
# Log wrong MongoDB auth (for details see filter 'filter.d/mongodb-auth.conf')
[mongodb-auth]
# change port when running with "--shardsvr" or "--configsvr" runtime operation
port = 27017
logpath = /var/log/mongodb/mongodb.log
# Jail for more extended banning of persistent abusers
# !!! WARNINGS !!!
# 1. Make sure that your loglevel specified in fail2ban.conf/.local
# is not at DEBUG level -- which might then cause fail2ban to fall into
# an infinite loop constantly feeding itself with non-informative lines
# 2. Increase dbpurgeage defined in fail2ban.conf to e.g. 648000 (7.5 days)
# to maintain entries for failed logins for sufficient amount of time
[recidive]
logpath = /var/log/fail2ban.log
banaction = %(banaction_allports)s
bantime = 604800 ; 1 week
findtime = 86400 ; 1 day
# Generic filter for PAM. Has to be used with action which bans all
# ports such as iptables-allports, shorewall
[pam-generic]
# pam-generic filter can be customized to monitor specific subset of 'tty's
banaction = %(banaction_allports)s
logpath = %(syslog_authpriv)s
backend = %(syslog_backend)s
[xinetd-fail]
banaction = iptables-multiport-log
logpath = %(syslog_daemon)s
backend = %(syslog_backend)s
maxretry = 2
# stunnel - need to set port for this
[stunnel]
logpath = /var/log/stunnel4/stunnel.log
[ejabberd-auth]
port = 5222
logpath = /var/log/ejabberd/ejabberd.log
[counter-strike]
logpath = /opt/cstrike/logs/L[0-9]*.log
# Firewall: http://www.cstrike-planet.com/faq/6
tcpport = 27030,27031,27032,27033,27034,27035,27036,27037,27038,27039
udpport = 1200,27000,27001,27002,27003,27004,27005,27006,27007,27008,27009,27010,27011,27012,27013,27014,27015
action = %(banaction)s[name=%(__name__)s-tcp, port="%(tcpport)s", protocol="tcp", chain="%(chain)s", actname=%(banaction)s-tcp]
%(banaction)s[name=%(__name__)s-udp, port="%(udpport)s", protocol="udp", chain="%(chain)s", actname=%(banaction)s-udp]
# consider low maxretry and a long bantime
# nobody except your own Nagios server should ever probe nrpe
[nagios]
logpath = %(syslog_daemon)s ; nrpe.cfg may define a different log_facility
backend = %(syslog_backend)s
maxretry = 1
[oracleims]
# see "oracleims" filter file for configuration requirement for Oracle IMS v6 and above
logpath = /opt/sun/comms/messaging64/log/mail.log_current
banaction = %(banaction_allports)s
[directadmin]
logpath = /var/log/directadmin/login.log
port = 2222
[portsentry]
logpath = /var/lib/portsentry/portsentry.history
maxretry = 1
[pass2allow-ftp]
# this pass2allow example allows FTP traffic after successful HTTP authentication
port = ftp,ftp-data,ftps,ftps-data
# knocking_url variable must be overridden to some secret value in jail.local
knocking_url = /knocking/
filter = apache-pass[knocking_url="%(knocking_url)s"]
# access log of the website with HTTP auth
logpath = %(apache_access_log)s
blocktype = RETURN
returntype = DROP
bantime = 3600
maxretry = 1
findtime = 1
[murmur]
# AKA mumble-server
port = 64738
action = %(banaction)s[name=%(__name__)s-tcp, port="%(port)s", protocol=tcp, chain="%(chain)s", actname=%(banaction)s-tcp]
%(banaction)s[name=%(__name__)s-udp, port="%(port)s", protocol=udp, chain="%(chain)s", actname=%(banaction)s-udp]
logpath = /var/log/mumble-server/mumble-server.log
[screensharingd]
# For Mac OS Screen Sharing Service (VNC)
logpath = /var/log/system.log
logencoding = utf-8
[haproxy-http-auth]
# HAProxy by default doesn't log to file you'll need to set it up to forward
# logs to a syslog server which would then write them to disk.
# See "haproxy-http-auth" filter for a brief cautionary note when setting
# maxretry and findtime.
logpath = /var/log/haproxy.log
[slapd]
port = ldap,ldaps
filter = slapd
logpath = /var/log/slapd.log
Code language: Basic (basic)Después de esto tenemos que reiniciar fail2ban con service fail2ban restart y verificar si todos los jails están cargados por:
fail2ban-client status status
Code language: Bash (bash)